poliquin@hobbit02:~/packages/printrun/Printrun$ ./pronsole.py 
Welcome to the printer console! Type "help" for a list of available commands.
offline> connect
No port specified - connecting to /dev/ttyUSB0 at 115200bps
start          
Printer is now online
Marlin 2.0.1   
Last Updated: 2019-12-24 | Author: (thisiskeithb, Ender-3)
Compiled: Jan 26 2020
Free Memory: 11732  PlannerBufferBytes: 1200
SD card ok     
EEPROM version mismatch (EEPROM=? Marlin=V74)
Hardcoded Default Settings Loaded
EEPROM version mismatch (EEPROM=? Marlin=V74)
Hardcoded Default Settings Loaded
SD card ok     
EEPROM version mismatch (EEPROM=? Marlin=V74)
Hardcoded Default Settings Loaded
EEPROM version mismatch (EEPROM=? Marlin=V74)
Hardcoded Default Settings Loaded
ttyUSB0 PC> run_gcode_script lasertest.gcode
Traceback (most recent call last):
  File "/home/poliquin/packages/printrun/Printrun/printrun/pronsole.py", line 1767, in do_run_gcode_script
    self.fgcode = RGSGCoder(l)
  File "/home/poliquin/packages/printrun/Printrun/printrun/pronsole.py", line 114, in __init__
    self.proc = run_command(line, {"$s": 'str(self.filename)'}, stdout = subprocess.PIPE, universal_newlines = True)
  File "/home/poliquin/packages/printrun/Printrun/printrun/utils.py", line 144, in run_command
    return subprocess.Popen(command, stderr = stderr, stdout = stdout, universal_newlines = universal_newlines)
  File "/usr/lib/python3.5/subprocess.py", line 947, in __init__
    restore_signals, start_new_session)
  File "/usr/lib/python3.5/subprocess.py", line 1551, in _execute_child
    raise child_exception_type(errno_num, err_msg)
FileNotFoundError: [Errno 2] No such file or directory: 'lasertest.gcode'

ttyUSB0 23°> 
ttyUSB0 23°> 
Disconnecting from printer...
Exiting program. Goodbye!
poliquin@hobbit02:~/packages/printrun/Printrun$ ./pronsole.py --version
printrun 2.0.0rc5
poliquin@hobbit02:~/packages/printrun/Printrun$